Concrete Cutting & Flat Sawing in Massachusetts
Professional diamond flat sawing for slabs, floors, driveways, and foundations — fast response, clean cuts, same-day service available
Concrete Cutting Services in Massachusetts
REDCORE provides professional concrete cutting services throughout Massachusetts, using high-performance diamond blade saws to make clean, straight cuts in concrete slabs, floors, driveways, sidewalks, patios, and roadways. Our flat sawing equipment handles cutting depths up to 24 inches, allowing us to cut through residential basement floors, commercial warehouse slabs, parking structures, and industrial foundations with equal precision. Every cut is made with water-cooled diamond blades that produce smooth, straight edges and minimize airborne dust.
Concrete cutting is the foundation of countless construction and renovation projects. When a plumber needs a trench cut in a basement floor for new drain lines, when an electrician requires a channel for underground conduit, or when a general contractor needs to remove a section of slab for a new stairway opening, professional diamond cutting is the fastest, cleanest, and most structurally sound method available. Unlike jackhammering, which fractures and damages surrounding concrete, diamond sawing creates precise cuts that preserve the integrity of the remaining slab and produce clean edges for patching and finishing.
Our concrete cutting crews operate across Springfield, Worcester, Pittsfield, Holyoke, Chicopee, Northampton, Amherst, and communities throughout Western and Central Massachusetts. We bring self-contained equipment including generators and water tanks, so we can work on new construction sites without utilities as easily as occupied commercial buildings. REDCORE coordinates with all trades on the jobsite, maintains full insurance coverage, and delivers the reliable scheduling that contractors depend on. Whether your project calls for a single 10-foot cut or thousands of linear feet of sawing, we have the equipment and manpower to complete it on time and within budget.
What We Offer
Diamond Flat Sawing
Walk-behind flat saws with diamond blades cut concrete slabs, floors, and pavements up to 24 inches deep with straight, precise lines and smooth finished edges.
Dust-Controlled Cutting
Water-cooled diamond blades suppress dust at the point of contact. For interior work, we deploy slurry containment systems to protect finished spaces.
Deep Cutting Capability
Our flat saws cut up to 24 inches deep in a single pass, handling everything from thin residential slabs to thick commercial and industrial foundations.
Straight & Accurate Cuts
Guide rails and chalk-line reference systems ensure every cut follows the intended path precisely, critical for trench work and section removal.
No Structural Damage
Diamond sawing eliminates the vibration and impact fracturing caused by jackhammers, preserving the structural integrity of surrounding concrete.
Versatile Material Cutting
We cut reinforced concrete, plain concrete, asphalt, block, brick, and stone with equal effectiveness using material-specific diamond blades.
Our Process
Layout & Marking
Cut lines are precisely marked on the concrete surface using chalk lines, laser guides, or layout measurements provided by the contractor. All marks are verified before cutting begins.
Equipment Positioning
The appropriate saw is selected based on the required cutting depth and material. Walk-behind flat saws are positioned at the starting point with water supply connected.
Diamond Cutting
The operator makes controlled passes along the marked lines, allowing the diamond blade to cut at optimal speed. Water cools the blade and controls dust throughout the process.
Material Removal (If Required)
For trench cuts and section removals, the cut concrete is broken out and removed after all saw cuts are complete. We can haul debris off-site or leave it for the general contractor.
Site Cleanup
All slurry, debris, and cutting residue is cleaned up. The finished cuts are inspected for accuracy and the site is left ready for the next phase of work.
What Clients Say About Our Concrete Cutting Work
“Our plumber recommended REDCORE for the basement floor cuts he needed. They came out, cut two straight trenches exactly where he marked, and the cuts were the right depth on the first pass. They put plastic sheeting over our finished stairway and cleaned up the slurry when they were done. It looked like nobody had been there except for the nice clean cuts in the floor.”
Jennifer Walsh, Homeowner -- Agawam, MA
Basement plumbing renovation
“We got three quotes for cutting our driveway to fix a broken water line. REDCORE was the middle price but they could get there two days sooner than the others. The cuts were perfectly straight and our paving contractor said the edges were the cleanest he had seen for a patch repair. Would call them again without hesitation.”
Lisa Moreau, Homeowner -- Westfield, MA
Driveway cut for water line repair
Frequently Asked Questions About Concrete Cutting
Our walk-behind flat saws cut up to 24 inches deep in a single pass. For most residential projects, slab thickness ranges from 4 to 8 inches. Commercial and industrial slabs may be 10 to 18 inches thick. We select the appropriate blade diameter and saw for each project's depth requirements.
Diamond cutting with water produces a concrete slurry rather than dust clouds. We contain and vacuum this slurry during the cutting process. For interior work, we use plastic sheeting and slurry vacuums to protect finished surfaces. The result is far cleaner than jackhammering or demolition methods.
Yes. Diamond sawing produces significantly less noise, vibration, and dust than alternative methods, making it suitable for occupied commercial buildings, residential homes, and sensitive environments like hospitals and schools. We coordinate timing to minimize disruption to occupants.
Pricing depends on the linear footage of cutting, slab thickness, rebar content, and site access. We provide free on-site estimates for all projects. As a general reference, simple residential slab cuts start at competitive rates per linear foot. Contact us for an accurate quote for your specific project.
Concrete cutting (flat sawing) uses a blade to make straight-line cuts, ideal for trenches, section removal, and expansion joints. Core drilling uses a cylindrical diamond bit to make round holes, ideal for pipe, conduit, and duct penetrations. Many projects require both services, and REDCORE provides both.
Need Concrete Cutting?
Common Applications
- Trench cutting for plumbing drain lines
- Floor saw cuts for electrical conduit
- Expansion and control joint cutting
- Driveway and sidewalk removal cuts
- Slab section removal for stairway openings
- Garage floor cutting for drain installation
- Parking lot and road repair cuts
- Foundation modification cuts
- Decorative scoring and pattern cuts
- Saw cutting for French drain installation
Equipment Used
- Husqvarna FS 5000 walk-behind flat saw
- Stihl TS 800 high-performance cutoff saw
- Diamond blades: 14" through 48" diameter
- Self-contained water supply tanks
- Slurry vacuum and containment systems
- Portable generator for sites without power
- Laser and chalk-line layout tools
Related Services
Applications
Industries
Need Concrete Cutting in Massachusetts?
Contact REDCORE today for a free estimate. Fast response, competitive pricing, professional results across Western and Central MA.