How Much Does Concrete Cutting Cost in Massachusetts? (Complete Price Guide)

Understanding Concrete Cutting Costs in Massachusetts

Whether you are a homeowner planning a basement renovation or a contractor bidding on a commercial project, understanding concrete cutting costs is essential for accurate budgeting. Prices in Massachusetts can vary significantly based on the type of cut, the thickness and reinforcement of the concrete, site accessibility, and the specific service provider you choose.

At REDCORE Concrete Cutting & Core Drilling, we believe in transparent pricing. This guide provides realistic price ranges for the most common concrete cutting services in the Springfield, MA area and throughout Western Massachusetts.

Flat Sawing (Slab Sawing) Costs

Flat sawing, also known as slab sawing, is the most common type of concrete cutting. It is used for cutting horizontal surfaces like floors, driveways, sidewalks, and parking lots.

• Standard flat sawing: $4 to $8 per linear foot for cuts up to 6 inches deep
• Deep cuts (6-12 inches): $8 to $14 per linear foot
• Extra-deep cuts (12+ inches): $14 to $25+ per linear foot

Most residential projects like cutting a trench for plumbing or creating an expansion joint fall into the standard range. The final price depends on concrete thickness, whether rebar is present, and the total linear footage of the cut.

Core Drilling Costs

Core drilling creates precise circular holes in concrete for plumbing pipes, electrical conduit, HVAC lines, dryer vents, and mini-split installations. Pricing depends primarily on the hole diameter and concrete thickness.

• Small holes (1-3 inches diameter): $75 to $150 per hole
• Medium holes (4-6 inches diameter): $125 to $250 per hole
• Large holes (7-12 inches diameter): $200 to $400 per hole
• Extra-large holes (12+ inches): $350 to $700+ per hole

Volume discounts are common when multiple holes are needed. For example, a plumber who needs ten 4-inch holes drilled through a basement floor will typically receive a better per-hole rate than a single-hole job.

Wall Sawing Costs

Wall sawing involves cutting vertical or overhead concrete surfaces, most commonly for creating door openings, window openings, or egress window cutouts in basement walls.

• Standard wall sawing: $15 to $25 per linear foot
• Thick walls (10+ inches): $25 to $40 per linear foot
• Egress window openings: $800 to $2,000 per opening (depending on wall thickness and size)
• Door openings: $1,200 to $3,000 per opening

Factors That Affect Pricing

Several factors can push your project cost higher or lower than the ranges listed above:

• Concrete thickness: Thicker concrete requires more time, more diamond blade wear, and sometimes specialized equipment.
• Reinforcement: Rebar or wire mesh increases cutting difficulty and blade wear, typically adding 20-40% to the base price.
• Access: Tight spaces, upper floors, or difficult-to-reach areas may require additional setup time or specialized equipment.
• Minimum charges: Most concrete cutting companies have a minimum job charge, typically ranging from $250 to $500. This covers mobilization, equipment setup, and travel time.
• Water management: Wet cutting produces slurry that must be contained and cleaned up. Indoor jobs may require additional water management.
• Permits: Some municipalities in Massachusetts require permits for structural modifications, which add to the overall project cost.

How to Get the Best Value

To get the most accurate and competitive pricing for your concrete cutting project in Massachusetts, follow these tips:

• Get at least two or three quotes from licensed, insured concrete cutting contractors.
• Provide as much detail as possible about the concrete thickness, whether rebar is present, and the exact dimensions of the cut.
• Combine multiple cuts into a single visit to take advantage of volume pricing.
• Schedule during off-peak seasons when possible, as spring and fall tend to be the busiest periods.
• Ask about included services like cleanup and slurry management.

Get a Free Estimate from REDCORE

At REDCORE Concrete Cutting & Core Drilling, we provide free, no-obligation estimates for all concrete cutting projects in Springfield, MA and the surrounding areas. Our pricing is competitive and transparent, with no hidden fees. Whether you need a single core drill hole or a full basement egress window cutout, we will give you an honest assessment of costs before any work begins.

Contact us today to discuss your project and receive a detailed quote tailored to your specific needs.